X-Tronic Model 4040-PRO-X "Platinum Series" Hot Air Rework & Soldering Station Complete Kit with 5 Extra Sizes/Styles of Soldering Tips, 5 Sizes/Styles of Hot Air Gun Nozzles (3 Straight & 2 Spiral) Plus some Nice Added Accessories!
NEW FEATURES for X-Tronic's 4040-PRO-X Hot Air Rework & Soldering Iron
Since its Introduction in 2011 the X-Tronic Modle 4040 has Continually been Ranked among the Top 10 Hot Air Rework & Soldering Stations in the USA. Some of the Technology has been updated from time to time, but not to the extent of this All New 4040-PRO-X Model. Check out some of the new Features of our X-Tronic 4040-PRO-X "Platinum Series" and we are Sure you will be Impressed!
Specifications: Total Wattage of 700 Watts - Temperature Range of Soldering Iron: 200°C - 500°C/392°F - 932°F (Temperature Stability: ±1.8°F/1.0°C), Temperature Range of Hot Air Gun: 100°C - 500°C/212°F - 932°F (Temperature Stability: ±1.8°F/1.0°C), Air Volume of Hot Air: 23L/M, Tip-to-Ground Voltage: <2mV - Working Environment: 0°F ~ 122°F/ 0°C ~ 50°C, Current: 10 Amps, Voltage: AC 110V/60 Hz
The Soldering Iron that comes with this Unit boasts a Stainless Steel Shank with an "Ergonomic Heat Resistant Silicone Grip" that is Very Comfortable to use. The Temperature Range of this Soldering Iron is 200°C to 500°C (392°F to 932°F).
This Soldering Iorn will heat up the Soldering Tip to the Top Temperature of 500°C in less than 30 Seconds when "Initially" turned on.
The Cord on the Soldering Iron is also made of 100% Silicone (Virtually NO Memory) and is 54" in Length.
The X-Tronic 4010-PRO-X comes with 1 - TI Soldering Tip already mounted in the Soldering Iron and 5 Extra Sizes/Styles as shown above. The 5 Extras are the Following Sizes/Styles:
These Soldering Tips are manufactured from High Quality Copper and Coated with Nickel Chromed Alloys for Strengthening the Hardness of the Tips.
This Station also Features a 600 Watt Hot Air Gun Powered by a Brushless DC Centrifugal Fan Hot Air Delivery System with a Temperature Range of 100°C - 500°C/212°F - 932°F, a Temperature Stability of ±1.8°F/1.0°C and an Air Volume of 56L/M.
It also Features an Auto Cool Down/Standby Mode Safety Feature when placed in the Top of the Tower Holder or the Side Holder.
This unit also comes with 5 Sizes of Hot Air Gun Nozzles as Follows.
Straight Nozzles:
Spiral Nozzles
The 4040-PRO-X comes with a Deluxe Upright Tower Soldering Iron & Hot Air Gun Holder with a Wet Sponge.
This Tower Holder will hold the Soldering Iron in the Bottom "Iron Cradle".
It will hold the Hot Air Gun in either the Bottom "Hot Air Gun Cradle" or you can place the Hot Air Gun Upside Down in the Top "Auto Cool Down/Stand By" Holder.
With the Soldering Iron placed in the Bottom "Soldering Iron Cradle" the Sleep Function "WILL" Activate Automatically and Go to Sleep in the amount of minutes you have it set for.
When the Hot Air Gun is placed in the Top Part of the Holder, the Auto Cool Down/Standby Mode "WILL" also Activate Automatically.
There is a Metal Nozzle Extractor on the bottom of the Tower Holder.
When a Hot Air Nozzle is assembled onto the hot air gun it is held on by a clamp ring and there is a 3mm gap between the nozzle and the gun.
Place this Gap between the Nozzle and the Hot Air Gun into the Nozzle Extractor and then pull to remove the nozzle.
The nozzle will fall into the metal area, which will protect the work area if the nozzle is still hot.
You can also "Holster" the Hot Air Gun in the Side Holder if you wish.
With the Hot Air Gun placed in this Side Holder, the Auto Cool Down/Standby Mode "WILL" also Activate Automatically.
A Good little Solder Sucker also comes with this Complete Kit.
It has good bit of suction and you can just hang onto it and use your thumb to reset and suck up the molten solder.
Simple design allows easy one-handed use and a lightweight and compact design.
Also Included is a Tube of 60-40 Tin Lead Rosin Core Solder Wire for Electrical Soldering and DIY
The Size is 0.039" (1.0mm) in Diameter and the Weight is 0.42oz(12g).
This "Pocket Pack" of Solder Wire is easy to store and you can even carry it in your pocket.
These Pinpoint Tweezers are made of Durable Stainless Steel.
It is Anti-Static and ESD Safe and we use a Non-Magnetic Paint on the Surface.
It is Resistant to most Acids and other Corrosive Substances.
A Roll of X-Tronic Solder Wick Braid for removing molten solder quickly and easily is also Included with this Kit.
The Width is 2.0mm and the Length is 1.5 meters.
As you all know, this will come in Handy on most all of your soldering jobs.